The Thermaltake Toughpower iRGB PLUS 1250W Titanium is the world’s first PSU pre-installed with a patented 16.8 million colors RGB fan that incorporate various high-tech components, leading technology and eco-friendly commendations. Featuring 80 PLUS Titanium certification with individually sleeved cable and flat cable, Toughpower iRGB PLUS Titanium Series adopts the highest quality components and fully modular design that always accommodate any mainstream build under any circumstance.
The combination of Toughpower iRGB PLUS Titanium and three intelligent platforms – DPS G PC APP 2.0, DPS G Smart Power Management (SPM) Cloud 1.0, and DPS G Mobile APP 1.0 helps users not just monitor smart power supply units, but also save the energy, reduce CO2 emission, and eventually protect the Earth.
 |
Full Lighted – A static lighting with your color choice, including RGB colors and single color. |
 |
Flow – Directional RGB colored flow across the individual LED of the ring. |
 |
RGB Spectrum – A seamless transition through the entire 16.8 million RGB color spectrum. |
 |
Ripple – Lights ripple out across the entire fan with your choice of 16.8 million colors. |
 |
Blink – Lights keep flashing on and off with single color or RGB colors. |
 |
Pulse – A slow fade in and fade out with your color choice. |
 |
Wave – A RGB wave flows across the entire fan. |
Toughpower iRGB PLUS Series is the best idea for users to go with when they are looking for an RGB PSU with remarkable functionality and aesthetics in all cases.
Smart Power Management Service Architecture
※The photo is for reference.
The first iRGB PSU series introduced by Thermaltake install with a patented circular16.8 million multi-colored 140mm fan. Users can freely adjust fan speed and customize the lighting effects with DPS G PC App.
Taiwan Patent: 105218791
US Patent Applied
China Patent Applied
The SPM platform provides three alert functions: fan failure, over temperature (over 140℉/60℃), and abnormal voltage level (over/under 5% of normal level) warning alert. That will help users to reduce the possibility of overheating your internal components and burning the PC. When the abnormal activities occur, the warning message will be pushed to the mobile devices and email. The SPM platform allows users to turn off the computer remotely via mobile app when users receive the warning message.
The Smart Power Management platform allows users to schedule the system to shutdown remotely through mobile App or cloud management. To save the energy and electricity cost, users could arrange the schedule to shutdown the system when the process is complete.
The Toughpower iRGB PLUS 1250W Titanium features 100% high quality Japanese brand capacitors, which greatly improves the durability and offers the highest stability and reliability.
Fully modular power supply offers cable selection for users while powering the system at an advantageous voltage. Individually sleeved cable and flat cable can make cable management easier, reduce clutter and increase airflow inside the chassis.
Toughpower iRGB PLUS 1250W Titanium Series comes with a 32Bit Microcontroller Unit (MCU) from Microchip Technology. The 32Bit MCU is a small computer on a single integrated circuit containing a processor core, memory, and programmable input/output peripherals. MCU can digitally control devices and processes, such as automobile engine control systems and office machines.
Digital power supplies sport high-efficiency switching transistors that perform only necessary steps and waste less energy given off as heat. In short, digital power supplies do not dissipate power, which creates waste, and incorporate smaller, lighter transistors. Using smaller parts that work more efficiently enables Thermaltake to craft smaller and lighter power supplies, typically one of the bulkiest components in any PC.
Toughpower iRGB PLUS 1250W Titanium is equipped with a powerful single +12V rail, please see the output specification below:
| AC INPUT |
Input Voltage: 100V – 240V |
||||
| DC OUTPUT | +3.3V | +5V | +12V | -12V | +5VSB |
| Max Output Current | 20A | 20A | 104A | 0.3A | 3A |
| Max Output Power | 100W | 1248W | 3.6W | 15W | |
| Continuous Power | 1250W | ||||
Toughpower iRGB 1250W Titanium Power Supply with DPS G software delivers up to 94% efficiency under real-world load conditions, promising the lowest power losses. Additionally, Toughpower iRGB PLUS 1250W Titanium has been optimized to work with Intel’s new, seventh-generatio Kaby lake processors to achieve maximum energy savings.
Toughpower i Series power supplies offer stable and sufficient output voltage for multiple VGA cards and high Capability of different VGA cards for VR system.
Aside from the silent and performance mode, DPS G PC APP 2.0 comes with the new Zero Fan mode to minimize the audible noise of your PC. The fan will be turned on around 60% of rated load to optimize the thermal performance and minimize the audible noise.
Users can access the ECO report and the Energy Consumption Report to understand the detailed information about CO2 emission and energy consumption by comparing current data with the previous 3 months. Users could simply save the money by setting the goal of how much kWh they are going to consume within a specific period through Energy Saving Plan. Users could also decide whether to receive the notification via email and mobile app in order to successfully achieve the goal of saving more money and energy. In addition, Power Usage Behavior report can provide a comprehensive analysis for Smart Power Supply users. With the PSU’s conversion efficiency on the y-axis and power consumption on the x-axis, the report presents a complete overview of your electricity consumption behavior. In addition, the report can recommend suitable power supply wattages for optimum efficiency.
 DPS G PC App |
|
|
| Monitor PSU in real-time | ECO report | Data analysis |
| Fan speed control | Energy consumption report | Warning alert |
| RGB LED control | Energy saving plan | PC off remote control |
| Collect data | Efficiency/wattage user behavior report | |
| Warning alert | PC Off Remote Control | |
  |
||
Specification:
| P/N | PS-TPI-1250DPCTXX-T |
| Short P/N | TPI-1250D-T |
| Model | TPG-1250DH3FCT |
| Type | Intel ATX 12V 2.31 & SSI EPS 12V 2.92 |
| Max. Output Capacity | 1250W |
| Peak Output Capacity | 1500W |
| Color | Black |
| Dimension （ W / H / D ） | 150mm(W) x 86mm(H) x 200mm(D) |
| PFC （Power Factor Correction） | Active PFC |
| Power Good Signal | 100-500 msec |
| Hold Up Time | > 16msec at 100% of full load (115Vac/ 230Vac input) |
| Input current | 15A |
| Input Frequency Range | 47Hz – 63Hz |
| Input Voltage | 100V – 240V |
| Operating Temperature | 0 ℃ to +50℃ |
| Operating Humidity | 20% to 90%,non-condensing |
| Storage Temperature | -20 ℃ to +70 ℃ |
| Storage Humidity | 5% to 95%, non-condensing |
| Cooling System | 14cm Riing PLUS Fan |
| Efficiency | MEET 80 Plus Titanium at 115Vac input. |
| MTBF | 120,000 hrs minimum |
| Safety Approval | CE/FCC/UL/ TUV/EAC |
| Protection | OPP, OVP, UVP, OCP, OTP, SCP |
| PCI-E 6+2pin/ 8pin | 8 |
SPM Supported Power Supply Collection
*Disclaimer:
- Due to the limitation of monitor ICs upon various motherboards and VGA cards, some of the CPU and VGA parameters may NOT be available.
- The margin of error in the parameters of voltage, current, efficiency and etc… might occur while the loading of the PSU is under 20%.